Priority RF Fault Callout
Live fault triage, on-site RF investigation, source location, tactical mitigation and findings note.
Callout details →
Five defined ways to engage one independent RF engineer. Each starts with the buyer's problem and states the practical output, timing and next step.
If you are unsure, send the symptoms and location. The initial review will identify the most appropriate route before any work is agreed.
Live fault triage, on-site RF investigation, source location, tactical mitigation and findings note.
Callout details →A baseline of the site RF environment, risk observations and prioritised recommendations.
Request scope →Dependency map, multi-band measurement, risk register and executive mitigation report.
Assessment details →A defined bench or on-site test programme for an underperforming RF product or system.
Diagnostic details →Site baseline, response commitment and priority access for operations that cannot start cold.
Compare cover →When trackers go dark, jamming is usually why. Independent detection, location and forensic proof - plus an on-site detector in development.
Something is breaking your wireless and you need it found — now.
When a network, control system, sensor array or radio link starts failing and nobody can explain it, the cause is usually an RF source nobody's looking for. I survey the affected area, characterise what's actually on the air, and separate signal from noise to pin down the disruption.
There's a transmitter that shouldn't be there. I pinpoint it.
Finding a source that doesn't want to be found is its own discipline. Using direction finding and signal-hunting technique honed in counter-surveillance work, I track interference back to its origin — whether that's a failing supply two units away or an external emitter bleeding into your band.
Your links, range or telemetry aren't performing as they should.
Not every RF problem is dramatic interference — sometimes a link just underperforms. I investigate poor range, unreliable links and flaky telemetry from the antenna and receiver up, finding the physical-layer reason the system isn't doing what the datasheet promised.
Once it's found, I engineer the fix — on my own bench.
This is the part most consultants skip. With a real workshop behind the practice, the remedy gets built and fitted, not subcontracted. Shielding, filtering, bonding and antenna re-work designed and fabricated to resolve the specific problem — diagnosis and cure under one roof.
You need a neutral, vendor-free technical verdict.
When a claim needs verifying or a dispute needs an impartial read, independence is the whole value. Selling no hardware and tied to no installer, I provide third-party assessment, failure analysis and performance verification that stands up because it has no other agenda.
Fixed-fee response visit when something's failing now. Located, proven, and a clear plan for the remedy before I leave.
Booked RF or wireless survey — baseline your environment or catch problems before they bite.
Guaranteed response time and priority callout for sites that can't afford the downtime, with your RF baseline on file.
Why is your GPS tracking unreliable? Independent diagnosis of reception, cellular backhaul, coverage gaps, antenna faults and jamming — for fleet, plant, logistics and lone-worker.
For infrastructureAn independent on-site survey of your exposure to GNSS jamming and spoofing — risk-rated report and mitigation plan. For ports, rail, logistics, data centres and utilities.
For legal teamsIndependent expert opinion in RF, GNSS, surveillance, counter-drone and electronics disputes. CPR Part 35 compliant; instructed by either side.
Independent electromagnetic-field and RF exposure measurements for homes, workplaces and properties near mobile phone masts. Professional measurement and reporting without medical diagnosis or unsupported health claims.
For defined technical requirements, use the specialist service page that most closely matches the work.
Describe the symptoms and I'll tell you straight. RF engineer, not a call centre.